Rembam Information:
Rembam has own factory and many experienced workers.The OEM bulb is engineered to perform to the exact specifications and requirements.Every lamp will be take strict quality test before leaving factory.So you don't need to doubt the quality.

Specifications:
Part number:DT01171
Wattage:170W
Specification:E19.4
Application:Business/Education/Home/School
Compatible:for HITACHI CP-X4021N HITACHI CP-X5021N HITACHI CP-WX4021N HITACHI CP-WX4022WN HITACHI CP-X5022WN

Package:
1 original bulb with housing
1 Instructions sheet

Installation:
1.Use a screwdriver to remove the screw from the cover.
2.Push up and remove the cover.
3.Remove the lamp protection film.
4.Remove the screw that secures the lamp module.
5.Disconnect the lamp connector from the projector.Lift the handle so that it stands up. Pull out the lamp module by force.

Notes:
1).To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb.The bulb may shatter and cause injury if it is dropped.
2).To avoid burns,allow the projector to cool for at least 60 minutes before replacing the lamp.
3).We provide excellent refund service with no any contidition with 12 hours feedback.If you have any questions,please contact us.We will try our best to sole your problem as soon as possible.