Search

Search

zdyCGTime HDMI Solderless Head Screw Terminal Adapter, HDMI Male Solderless Module Plug Junction Box HD Cable Connector Signal Module with Metal Shell Adapter.(Metal Shell)(2Pack/Male

KWD 7
Brand
zdyCGTime
Weight
100 g
ColorHDMI male (Metal shell)
– 1 +

Special Features

  • HDMI high-definition solderless screw terminal connector Connector 1:HDMI male interface. Connector 2:20-way/pin female screw terminal jack. Quantity: (2 Pack) Material:Metal Case.
  • HDMI terminal adapter,apply to HDMI panel for easy wiring in engineering/home improvement, buried in the wall, compatible with HDMI 2.0, 19 1-pin (5P 4C ADB); 1.4 and 1.3. The length of the HDMI cable can be extended by connecting a single wire with an open cable end to your HDMI jack.
  • Environmentally friendly copper terminal design,only need a screwdriver and a wire stripper,easy wiring does not require cumbersome tools,reducing the difficulty of engineering wiring,strip the head of the wire and put it in the middle of the screw column, tighten the screw, and the cable is well connected Pulling is not easy to drop, durable,resistant to unplugging,good contact.
  • Widely compatible with HDMI cables, with 4 different diameter tail pipes, supporting cable diameters of 5mm,7mm,9mm and 10mm. It can be used with various HDMI cables on the market to better lock the cable body and prevent the cable from falling off after pulling.
  • Applicable to TV computers, projectors, monitors, set-top boxes and other devices with HDMI signals.

Description

HDMI male to 20 pin/way female screw terminal block jack connector, supports cable diameter of 5mm 7mm 9mm 10mm.
Quantity: 2 Pack
Size:Length, Width, Height (6.1*2.3*1.6cm)
Material: Metal shell
Connector 1: HDMI male connector.
Connector 2: 20-pin/way female screw terminal jack.
Pins: 20/pin
Compatible with all versions of HDMI interface, easy wiring does not require cumbersome tools, reducing the difficulty of engineering wiring, and the cable is not easy to drop when it is well connected.
Note: Most HDMIs have different wiring schemes. Wiring diagrams vary by manufacturer. Our wiring diagrams are shown in application diagrams and are generally for reference only. Considering that HDMI 2.0 has many nodes, it is recommended to use a multimeter to measure the connection.

It is suitable for TV computers, projectors, monitors, set-top boxes and other equipment with HDMI signals. It can be connected without soldering lines.

Package Contents:
2 x HDMI2.0 Male Terminal Adapter
1 x Slotted Screwdriver
2 x Clamp Tail Pipe Kit (5mm 7mm 9mm 10mm hole diameter)

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}