MICRO CLEAN by Compressed Air USA
60 CFM Oil Water Separator for Air Compressor Condensate Drains

MICRO CLEAN Oil Water Separators are the most reliable and highest performing separators available on the market. Safe, simple, reliable, economical on-site treatment of compressed air condensate with discharge quality that exceeds U.S. EPA standards through to end of life.

The advanced STERLING filtration media is non-carbon based, made from 100% recyclable materials, and is the most effective solution to oil water separation with its long life and outlet concentrations as low as 5 ppmv, even with synthetic lubricants.

In just 1 year a 15 horsepower compressor will produce 2000 gallons of condensate. Discharging oily waste inhibits the operation of waste water processing plants, and is also illegal. Treat it at the source with the most efficient and lowest cost of ownership, and then discharge it down the drain.

HOW IT WORKS:
Condensate from compressors, refrigerated dryers, coolers, or other drain points are piped directly to the Micro Clean separator.
Here it enters the primary filter which: depressurizes condensate, traps solid particles which protects the secondary filter, and catches bulk hydrocarbons with a high capacity oil absorbent.
Next, the condensate passes through a deep bed of STERLING filtration media which absorbs oil providing oil concentrations of 5ppm or less.
The remaining water can be disposed of safely and in compliance with environmental regulations.

Max Service Life: 2-years, 8000 hours @ 30 cfm, 4000 hours @ 60 cfm
Temp Rating: 35 to 110F
Pressure Rating: 232psi max
Max Oil Carryover: Capacity: Rated by Compressor Air Flow of up to 60 CFM
Connections: 1/4" Inlet (Push-Fit), 3/8" Discharge (Push-Fit)
Warranty: 1-Year