This module adopts the TI TPS61088 power chip scheme, with stable performance, small ripple, and 10A switching current capacity, with a switching frequency of about 1MHz
The module provides two operating modes: PWM and PFM, which can be adjusted by the user (default PFM low-power mode), high-quality tantalum capacitors on board (adjustable version), and high current inductors. The use of high-quality components further improves module performance and stability.
The module has stability that is unmatched by most other boost modules when outputting high power. It is a good choice for users to use multiple lithium batteries in parallel to supply boost voltage and apply it to high current output of 5V voltage 4A/5A
Similarly, boosting to a voltage of 9V/12V is not a problem. The output power can reach a Highest of 30W, with 9V and 12V voltage outputs. When outputting in high current situations, users only need to do a good job of heat dissipation to obtain good on-load output ripple.
Unless otherwise specified, the following parameters are all tested in PWM mode (recommended operating mode).
JESSINIE 5Pcs PWM to Voltage Module 0%-100 PWM to 0-10V Voltage Signal Converter Voltage Converter Module for PWM Industrial Control
KWD 6.500
JESSINIE 5Pcs 12V 300mA Power Supply Module 3.5W AC-DC Isolation Switch Power Module 220V to 12V Buck Converter Board Module
KWD 4
JESSINIE 5Pcs 5V 700mA Power Supply Module 3.5W AC-DC Isolation Switch Power Module 220V to 5V Buck Converter Board Module
KWD 4
UL Listed 12V 1A 0.8A 0.5A Power Supply 12W Charger AC Adapter 12.0V 1000mA 800mA 600mA 500mA 300mA Regulated 12 Volt DC Switching Power Cord Plug with 10 Interchangeable Jacks PERFEIDY
KWD 6
