- Shopping, made easy.
- /
- Get the app!
Waveshare POE HAT Board for Raspberry Pi 5, Power Over Ethernet HAT(POE) with Onboard Cooling Fan and Metal Heatsink, Supports 802.3af/at Network Standard,12V and 5V Power Outputs
KWD 12
ESP32-S3 7inch Capacitive Touch Display, ESP32 Development Board with 7inch LCD Screen 800×480, 32-bit LX7 Dual-Core Processor, Up to 240MHz Frequency, Supports WiFi & Bluetooth, with Onboard Antenna
KWD 20
Waveshare USB to LoRa Data Transfer Module Based On SX1262, 850~930MHz Frequency, Suitable for Data Acquisition in Industry and Agriculture, with TCXO Crystal Oscillator
KWD 10.500
Waveshare 7.5inch e-Paper HAT for Raspberry Pi 5 4B Pi 3B+ Pi3B Pi Zero W Zero 2W/Jetson Nano/withArduino,7.5inch E-Ink Display HAT 800 x 480 SPI Interface Black and White Display Color 3.3V/5V
KWD 26
ESP32-C6 Mini Development Board Based on ESP32-C6FH4 Dual Processors 160MHz Support 2.4GHz WiFi 6 & Bluetooth 5 USB Type-C Port 22 x GPIO pins
KWD 4.500
CSI FPC Flexible Cable for Raspberry Pi 5, 22Pin to 15Pin, 0.2 M Length, Suitable for CSI Camera Modules, Connecting CSI Camera Module to Raspberry Pi 5 or Compute Module 4, Black
KWD 3.500
Industrial ESP32-S3 6-Channel WiFi Relay Module, Supports WiFi/Bluetooth / RS485 Remote Control/Pico HAT, Built-in Power Isolation and Optocoupler Isolation Protection, with Rail-Mount Case
KWD 15
ESP32-S3 Development Board with 1.28inch IPS Round Touch LCD 240x240 Resolution and with CNC Metal Case, Accelerometer and Gyroscope Sensor, Supports WiFi/Bluetooth
KWD 15
ESP32-S3-Nano Development Board with Pre-soldered Header, Based on ESP32-S3R8 with 32-bit LX7 Dual-Core Processor, Integrated 2.4GHz WiFi+Bluetooth, Compatible with Ardui-no Nano ESP32
KWD 5.500
Waveshare 2inch LCD Display Module IPS Screen 240×320 Resolution, 262K Display Color Embedded ST7789VW Driver Chip SPI Interface Compatible with Raspberry Pi/with Arduino/STM32
KWD 6
Waveshare 1.83inch LCD Display Module Rounded Corners IPS LCD 240 x280 Resolution, 65K Display Colors SPI Interface Compatible with Raspberry Pi/with Arduino/STM32/ESP32, etc
KWD 6.500
Luckfox Pico Ultra W RV1106G3 Linux Micro Development Board, Integrate ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, Input 5M @30fps, 0.5TOPS, Support int4, int8 and int16 (with WiFi, with 8GB EMMC)
KWD 13
Waveshare ESP32-GEEK Development Board, Based On ESP32-S3R2 Chip, with 1.14inch 65K Color LCD, with USB-A Male Port/I2C Port/GPIO Header and White Plastic Case, Supports WiFi & Bluetooth LE
KWD 8
with Pre-Soldered Pin Header Raspberry Pi Pico Board, Using RP2040 Microcontroller Chip, Dual-Core ARM Cortex M0+ Processor, Flexible Clock Running up to 133 MHz Support C/C++,MicroPython
KWD 5
ESP32-S3 Development Board with 2.8inch Capacitive Touch Screen 240×320, 5-point Touch IPS Display, 32-bit LX7 Dual-Core Processor, with GPIO, UART, I2C for Better Expansion, with 2030 Speaker
KWD 14.500
Official DSI FPC Flexible Cable Compatible with Raspberry Pi 5 4GB/8GB, 22Pin to 15Pin, 200MM/20CM, Suitable for DSI Display Screens
KWD 3.500
Luckfox Pico Mini RV1103 Linux Micro Development Board, Integrate ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, Support MIPI CSI GPIO UART SPI I2C USB Interface Onboard 64MB Memory with 128MB Flash
KWD 6.500
SIM7028 NB-IoT HAT for Raspberry Pi 5/4B/3B+/2B/Zero/Zero 2W and Jetson Nano,Onboard 40PIN GPIO Header, Supports Global Band NB-IoT Communication with GSM Antenna Type-C Interface
KWD 9.500
2PCS Serial Bus Servo Driver Board, Integrates Servo Power Supply and Control Circuit, for ST/SC Series Serial Bus Servos, Supports 253 ST/SC Series Serial Bus Servos at The Same Time
KWD 7.500
Waveshare PCIe to USB 3.2 Gen1 HAT for Raspberry Pi 5, PCIe to USB HUB, PCIe to Four High Speed USB Ports for Connecting More Peripherals, Driver-Free Plug and Play, HAT + Standard
KWD 11
ESP32-S3 Development Board with 1.69inch IPS Display 240×280 Pixels 262K LCD,240MHz Dual-Core Processor, Accelerometer and Gyroscope Sensor, Support W-iF-i/Blue-Too th, Suitable for Various Scenarios
KWD 9.500
2PCS CSI FPC Flexible Cable for Raspberry Pi 5, 22Pin to 15Pin, Suitable for CSI Camera Modules, Connecting CSI Camera Module to Raspberry Pi 5 or Compute Module 4 (30CM / 300MM Length)
KWD 4.500
Waveshare BME688 Environmental Sensor with AI Function, Temperature/Humidity/Barometric Pressure Detection, I2C/SPI Interface, Compatible with Ardu/Raspberry Pi/Raspberry Pi Pico / ESP32,etc.
KWD 12
Waveshare 2.42inch OLED Display Module 128x64 Pixels White Display Color Embedded SSD1309 Driver Chip SPI / I2C Communication, Compatible with Raspberry Pi/forArduino/STM32/ ESP32/Jetson Nano
KWD 8
ESP32-C6 Microcontroller W-i-F-i Development Board Adopts ESP32-C6-WROOM-1-N8 Module Built-in 8MB Flash, Integrated W-i-F-i 6 Blue-Too-th 5 and and IEEE 802.15.4, Support USB and UART Development
KWD 5
Luckfox Pico Ultra PoE Kit RV1106G3 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, Input 5M @30fps ISP (with 8GB EMMC, with POE Module, Without WiFi)
KWD 14.500
Luckfox Pico Max Linux Micro Development Board with Pre-Soldered Header RV1106G3 Chip, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, with Rich Interfaces-256MB Memory
KWD 9.500
Official CSI FPC Flexible Cable Compatible with Raspberry Pi 5, 22Pin to 15Pin, Suitable for CSI Camera Modules, 300MM/30CM/0.98FT Long Extension
KWD 4
Pico 2 Kit with Pre-Soldered Header Compatible with Raspberry Pi Pico 2 Microcontroller Board +USB Cable, Using RP2350 Chip, Dual-Core & Dual-Architecture Design, 520KB SRAM 4MB Flash (3 Items)
KWD 5.500
ESP32-S3 Ethernet Development Board, 10/100Mbps RJ45 Ethernet Port, Support W-i-Fi & BLE, Ethernet Communication, 240MHz Dual Core Processor, Onboard Type-C Port, with PoE Module+ OV2640 Camera
KWD 14
USB to RS232/RS485 Serial Converter Adapter, Onboard Original FT232RNL Chip Stable, Compatible withRaspberry Pi/Jetson Nano/Windows XP/7/8/10/11, etc
KWD 8
ESP32-S3 Mini Development Board Tiny Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency,Integrated 2.4GHz W-i-F-i and Blue-Too-th LE Dual-Mode Wire-Less Communication
KWD 5
