Convenient EDC tool and simple to operate. Durable and fuel refillable, can be used for thousands of times. Applicable at anywhere, anytime and any condition. Compact and light weight design, very handy and easy to carry.

HOW TO USE?
1. Rotate counterclockwise to open the lid and add kerosene.
2. Screw the scraper back and wait 3 Min, let the cotton and wick fully absorb the lighter fluid.
3. Holding the scraper at a 45-degree angle with the flint. Push hard and slide downward to ignite.

Important: Please Scrape off the black wax on the surface of flint strips for the first time use. The black plating and small contact area are both not good for spark making.

Please extend or change the wick by the steps as below.
1. Pull the steel scraper out by pliers.
2. Slowly pull the wick out, stop pulling if you think it's long enough.
3. Put the scraper back to the middle of the wick, and then lightly hammer it back to the pipe.
4. The exposed part of the wick should be at least half of the length of the exposed scraper.

Package Includes:
- 1 x Metal Match Keychain
- 1 x standby parts for long time

Note:
- Keep away from children, unless there are adults along with them.
- Due to air mail regulation, the lighter comes with no fuel (gasoline or kerosene).
- When the flame become weaker or you can see the cotton is on fire, you need to dip the metal match again before another ignition.