Specification
Item Type: Electric Knotting Machine
Material: ABS, Stainless Steel
Gross Weight: 131g / 4.6oz
Product Size: Approx.110 x 25 x 62mm / 4.3 x 1.0 x 2.4in
Suitable Type: PE wire (No.0.6-3) front wire (6-40lb)
Battery Type: Polymer battery (delivered with built in battery)
Battery Capacity: 300mAh
Battery
Quantity: 1
Usage:
Step 1: Tighten the front wire tray with a cable clip
Step 2: The wire, head up, is stuck in the left slot. It's stuck underneath
Step 3: Place the main line of the PE line face up on the right side
Step 4: Lift the coil and gently tie the main line with your right hand, winding diagonally, then diagonally up
Step 5: Lift the trough and gently wrap your left hand around the main line, then up diagonally
Step 5: Remove the twisted cable
Step 6: Pinch the front line and PE thread with a slippy thread, wrap the two into a knot with PE thread
Step 7: Tighten the ends until the knot position becomes tighter and the color becomes darker (important)
Step 8: Cut the excess wire front end
Step 9: PE thread head and main line tie a fixed knot, cut the thread head
Step 10: Done

Package List
1 x Knotting Machine
1 x Data Cable
1 x Clip
1 x Manual