AnyTone AT-500M II CB mobile radio

Function and features:
WX weather channel(USA version only)
VOX function
CTCSS/DCS code
Output power AM/FM 4W
NRC (TX&RX noise reduction)
Echo/RB/Key beep
RF gain and Mic gain control
12V Input Voltage
2K/4K FM deviation selection
Talkback/PA function
Two scan mode
Support both electret and dynamic microphone
Hi-cut function
NB/ANL

Specification:
GENERAL:
Modulation mode: AM/FM
Frequency range: 26.965-27.405MHz
Frequency tolerance: ±5.0ppm
Input voltage: 12V
Dimensions: 7.3*4.9*1.5 inch (18.5*12.4*3.8 cm)
Weight: 1.37 lb (620 g)
Operating temperature Range: -20℃ to +50℃
Current drain transmit: 3A MAX
Current drain receive: Squelched 0.3A
Current drain VOL max: 0.7A
Antenna connector: UHF, SO-239
TRANSMITTER:
Power output: 4W
Transmission interference: inferior to 4nW
Frequency response: 300-3000Hz
Modulated signal distortion: inferior to 5%
Output impedance: 50 ohms
RECEIVER:
Sensitivity: Less than 1uV for 10dB(S+N)/N
Image rejection: 70dB
Adjacent channel rejection: 60dB
IF frequencies: 1st 10.695MHz; 2nd 455KHz
Automatic gain control(AGC): Less than 10dB change in audio; Output for inputs from 10 to 50000uV
Squelch: less than 1uV
Audio output power: 2Watts at 8Ω less than 10% distortion
Frequency response: 300-3000Hz

Accessories:
AnyTone AT-500M II CB radio x 1
Microphone x 1
Microphone hanger x 1
Mobile bracket x 1
Spare fuses 5A 250V x 1
Screws x 4
User manual x 1
Pads x 4
Adjusting screws x 2
Non-slip mat x 2