RTV Silicone Gasket Maker:
High temp sealant is a specialized sealing product for automotive engines. Motor sealant can form a uniform, stable and continuous thin layer on the connecting surfaces of parts to ensure the sealing performance between these parts and prevent oil and gas leakage

Efficient Performance:
1. Red rtv gasket maker can work under high temperature, high pressure, vibration and other conditions
2. Fast curing in a short time to form an effective seal, with good sealing and anti-vibration, anti-leakage performance
3. After curing, it can form a flexible rubber band. Can be replaced with cork, felt, rubber and paper seals to fill air holes and scratches
4. Suitable temperature range is 60~300°C
5. Resistant to high temperature, water, freezing, steam, oil, gear oil, anti-freezing 6. Non-corrosive, can be used for a variety of seals

Use Steps:
1. Clean the surface with suitable cleaning solution, remove oil, dust and other impurities
2. Apply the sealant evenly to the surface to be sealed
3. Apply the sealant and then install it
4. During the assembly process, a certain pressure must be applied to ensure that the sealant completely fills the joints
5. Curing time 10-30min (room temperature: 25℃)
6. If the environment is different, the curing time will also be different

Widely Used:
The right stuff gasket maker is not only suitable for sealing and damping various automotive parts, such as automobile, motorcycle and marine engines, cylinders, gearboxes, front and rear axles, pumps, compressors, oil sumps and thermostats