Search

KWD 0

Brand
Paintville
Category
Car Care & Wash
1 +

Special Features

  • 【Tailored】: Customized for Tesla model Y 2020-2024.Accessory kit included spray bottle and felt squeegees.
  • 【Block UV Keep Cooling】:Use 8.5mil high quality TPU.Add thermal insulation material to achieve 99%UV-blocking rate and 97%infrared-blocking rate.Prevent heat from entering the car, achieving a sense of cooling. (Note: It cannot physically block the sun)
  • 【Retain The Original Tesla Design】:Say goodbye to completely enclosed sunshades and restore Tesla's transparent design.Does not affect the senses and retains the most authentic colors.
  • 【About Installing】: ① Clean the car and then dry with a clean towel. Make sure to remove dirt and grease. ② Create a slip solution by mixing approximately 15% neutral detergent and 85% water in a spray bottle . And make sure the solution is mixed. ③ Spray the mounting area and front of the film , then remove the film from the backing and spray the backside . ④Use the squeegee to remove any air bubbles between the film and paint.
  • 【Note】:①、Do not allow any portion of the film to hang off the edge of the vehicle.②、If you accidentally get sand, gravel, or dust during installation, you can rinse it off by spraying it with a lubricant.③、 Spray enough slip solution as needed, and you can push lightly with your fingers to align the film with the mounting location. ④、The LH and RH film pieces are not interchangeable; the sticky backing should be applied to the paint of the car and follow the contour of the body.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}