EYPINS Heavy Duty Security Ground Anchor - Hardened Steel Double-Layer Anti-Theft Wall/Floor Anchor Mount for Motorcycles, Bikes, Scooters - Permanent Locking Point for Chain Locks
DOUBLE LAYER CONSTRUCTION: Heavy Duty Hardened Steel Double Layer Anti-theft Wall Anchor Lock, this floor anchor lock has a very high level of security, adopting a double-layer design with hardened, heavy-duty, 5mm thick steel on both the inner and outer layers
UNIVERSAL LARGER SIZE: The anchor size has been enlarged to accommodate multiple chains, showing a trapezoidal structure, length: 6cm, inner upper width: 4.5cm, inner lower width: 8.5cm, inner height: 4.2cm can accommodate two 10mm thick chains or four 7mm thick chains through the use of the anchor, can be used for locking multiple objects, and can be used in conjunction with the vast majority of chain locks and U-locks
STRONG CONSTRUCTION: Use 4 x 16mm thick fixed anchor points, attack-tested hardened steel bolt retainer, will bring permanent locking points for indoor or outdoor use after installation
EASY INSTALLATION: Install the expansion screws on the ground, extract the black screws, place the product on the holes, and then tighten the black screws with an Allen screwdriver
MATCH WITH MULTIPLE ACCESSORIES: Match with the top 4 expansion screws, 4 anti-removal small balls and an allen wrench for installation. Note: Please prepare a 16mm drill bit for installation
Description
Specification:
Metal plate: 15.1*15 cm
Length of inner trapezoidal structure: 6 cm
Width below inner trapezoidal structure: 8.5 cm
Width over inner trapezoidal structure: 4.5 cm
Height of inner trapezoidal structure: 4.2 cm
Length of outer trapezoid: 6 cm
Width under outer trapezoidal structure: 12.5 cm
Width over outer trapezoidal structure: 7 cm
Height of outer trapezoidal structure: 6.5 cm
Note:
1.To fix this anchor, you will need a 16 mm drill bit tip.
2.When installing, the expansion anchor of this product should be knocked directly into the drilling hole together with the black screw. Please do not take out the black screw inside the expansion anchor before installation. The black screw can be rotated out after the expansion anchor is knocked into the hole.
Package Contents:
1 x Ground Anchor
4 x Expansion Stud Bolts
4 x Anti-pullout Metal Balls
1 x Allen Keys