AC Compressor ClutchCompatible with OEM numbers:
38810-RNA-A01,38810RNAA02,38810RRBA01, 4901, 4918, 2021929, 3410, 4918U1, 0610225
10361921, 1102577, 1102608, 1102638, 5512349, 6512349, 7512349, 140250,
638880, 98555 ,97555,255528, 275739, 2004918,C1804
Fitment:
2006-2011 Civic 1.8L DX Coupe 2-Door / DX Sedan 4-Door / EX Coupe 2-Door / EX Sedan 4-Door / GX Sedan 4-Door / LX Coupe 2-Door / LX Sedan 4-Door
2008-2011 Civic 1.8L DX-G Coupe 2-Door / DX-G Sedan 4-Door / EX-L Sedan 4-Door
2009-2011 Civic 1.8L EX-L Coupe 2-Door / LX-S Sedan 4-Door
2006-2007 Civic 1.8L EXS Sedan 4-Door / LXS Sedan 4-Door
2009-2010 Civic 1.8L Sport Sedan 4-Door
How to install?
1. Always wear eye protection.
2. Remove the failed compressor. Transfer any switches, sensors, brackets, or manifolds from the original compressor to the replacement unit.
3. Thoroughly flush each component not being replaced with an approved AC flush solvent.
4. Replace the accumulator or dryer and all expansion devices. including the orifice tube and screen.
5. After installing the replacement compressor on the vehicle ensure proper mounting and belt alignment.
6. It is recommended to install an in-line filter in the suction line near the compressor inlet.
7. Add the proper type and amount of ac oil as per manufacturers procedures.
8. Apply a vacuum to the car ac system. A minimum of 29 inches of mercury for one hour to insure moisture and residual flushing solids or boiled from the system.
9. Recharge your air conditioning system using the recommended Freon.
10. After you finish your repairs, conduct a complete system performance test.