Tips:
This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool
Please DO NOT attempt to start a sensor replacement job if your scan tool or OBD diagnostic tool cannot detect our sensor to display information such as Real ID, Pressure, Frequency，battery status

Auto Relearn:
Set tyre pressure
Start the engine
On dashboard, set the system into the relearn mode
Drive until the relearn is completed

Manual Relearn:
Engage parking brake and inflate all tires
set vehicle into the relearn mode
Use tool to activate the Left Front sensor
Repeat for RF/RR/LR tires
After activate for sensor. Relearn complete, the dashboard will show the info

OBDII RELEARN
OBDII connector is required
Confirm TPMS sensors are properly installed
Adjust tire pressures to placard value
Activate TPMS Tool on left front tire sidewall next to the valve stem
Repeat for RF/RR/LR tires (Spare)if required
Apply OBD connector to DLC
Turn ignition to ON, Press OK on TPMS Tool to transfer data to ECU
Disconnect OBD connector from DLC
Turn ignition to OFF then ON
Drive at 12 mph for up to 5 minutes