DASBET Turbo System Leakage Tester Kit, Turbo Boost Leak Tester Set with 4 Pairs of Stepped Adapters 1-3/8" to 3-1/2", Turbo Pressure Leakage Tester for Cooling Emissions Exhaust Pipes
Easy Troubleshooting: Turbo system leakage tester kit is specially designed to check turbo system leaks or cooling system pipes. It helps you easily troubleshoot turbo leaks and locate the leak location. Simply plug the intake and exhaust with plugs, connect them to the air compressor with a regulator, and pressurize the turbo system. Once pressurized, you can see if the gauge maintains pressure and hear any leaks.
Comprehensive Set: The turbocharger turbo boost leak tester kit comes with a 0-6 bar (0-87 psi) gauge to accurately measure the pressure inside the hose. It includes a pressure regulator that locks when pressed down, and a red manual valve to control air pressure on and off. Along with 4 pairs of stepped Adapters (35mm - 90mm), an American air connector, an Asian air connector, and a European air connector, all packed in a storage case.
Quick Locate Leaks: Turbo boost pressure leakage tester is designed to accurately detect and locate leaks in the the turbocharger, cooling and emissions systems of most cars and light trucks. Help you charge the turbo system with a low-pressure regulated shop main air source to indicate the presence of leaks within the system. Quickly test the air tightness of your turbocharging system. In addition to being used on turbochargers, it can also be used to cooling systems pipe or exhaust leakage test.
Easy Operation: Simply attach the adapters, connect the pressure gauge to your workshop airline, pressurize the system, you can see if the gauge maintains pressure and listening for any indications of a leak. If the pressure drops, the leaks can be easily found by hand or with spray. If the pressure is too high, you can pull the red overpressure relief valve to lower the air pressure.
Wide Applications: This turbo boost leak tester set is equipped with 4 pairs of stepped adapters for plugging the intake and exhaust pipes. The multiple sizes allow for fitting several size hoses, which can work on hoses with diameters ranging from 1.38" to 3.54". Detailed dimensions include 1.38''/35mm, 1.57''/40mm, 1.77''/45mm; 1.97''/50mm, 2.17''/55mm, 2.36''/60mm; 2.56''/65mm, 2.76''/70mm, 2.95''/75mm; 3.15''/80mm, 3.35''/85mm, 3.54''/90mm.
DASBET Universal Overhead Valve Spring Compressor | Valve Removal Installer Tool Overhead Valve Removal Installer Tool Fit for Quick Removal of Valve Springs
KWD 5.500
DASBET Automotive Car Steering Wheel Puller Compressor Remover Set | Steering Wheel Lock Plate Removal Tool Kit
KWD 10
DASBET 13PCS Harmonic Balancer Steering Wheel Puller Tool Flywheel Puller Crankshaft Pulley Puller Crankshaft Pulley Removal Steering Wheel Pulling Set
KWD 7
Ztech DASBET Ball Joint, Tie Rod, and Pitman Arm 5-Piece Tool Separator for Cars and Light Trucks
KWD 9
