*Please use the Parts Finder at the top of this page to ensure your application!

*Oil pump usually has multi choices based on detailed specifications, please contact us first for any uncertainty, thanks a bunch!

VIPCAR 10355 High-Pressure Standard Volume Oil Pump for GM. Gen. IV 5.3 6.0 6.2L V8 LS Engine
Additional Pressure Over Stock Percentage: 20%
Adjustable Bypass Pressure: Yes
Alternate Pressure Springs Included: Yes
Drive Type: Crankshaft
Gasket Or Seal Included: Yes
Grade Type: Performance
Height: 4.300 in
Height: 109.00 mm
Housing Material: Cast Aluminum
Mounting Hole Diameter: 0.360 in
Mounting Hole Diameter: 9.15 mm
Mounting Hole Quantity: 4
Oil Pump Pressure Type: High Pressure
Oil Pump Type: Rotary
Oil Pump Volume Type: Standard Volume
Pickup Tube Diameter: 22.23 mm
Pickup Tube Diameter: 0.875 in
Width: 210.00 mm
Width: 8.250 in
Installation Tips
*Be sure to clean off the old seals on the joint surface after disassembly
*Be sure completely drain off the oil and clean the oil pan.
*Check the installation surface of the pump w/o knocked or bruised before installation
*Be careful with the auxiliary lip of the oil seal when passing through the camshaft
*Be sure the pump was perfectly aligned with the position of the assembly hole before tightening the bolts
*Be sure to inject clean oil into the inlet and outlet holes, and confirm the pump rotates flexibly w/o sticking
*Highly Recommended to replace the filter and seals together with the oil pump
*Highly Recommended diagonal screwing by proper torque