Description
Contents of Kit
1.Remote Control Assy
2.Horn Connector
3.2 Keys
4.Lanyard
5.3 Pin Connector With Lock Wedge
6.Mounting Bolts and Spacer Kit
7.Installation Instruction
Remote Control Features
1.Trim and Tilt Switch
2.Remote Control Lever
3.Fast idle lever
4.Emergency Stop Switch
5.Adjusting Screw
6.Netural lock lever
7.Shift position label
8.Handle, shift and throttle
9.Warning horn included
10.Port or Starboard station mounting
11.3.2KG
-Note: Not compatible with Stern Drive applications
Application
This control box -surface or side mounted ignition switch, excluding adapter harness and control cable.
The suitable wired for this control box(exclude the adapter harnesses and control cables):
(1) 1996 and newer engine are suitable adapter harness modle:
0176339 12 Ft
0176340 15 Ft
0176341 20 Ft
0176342 28 Ft
(2) Adapter harness 0768411 includes trim and tilt adapter compatible with 1973-1995 engines
(3) Pre-1979 engines need to replace the control cable with the post-1979 control cable CC205XX
(4) Another option for adapter harness including interior trim is CDI part number, 423-6344 (engine side only). This is an 18 inch extension of the trim hook and harness. If you convert a pre-1995 motor, you may also need the male plug end ᦇ 514685 and wedge pin ᦇ 514682 to convert the female plug to the male plug