Product Fitment Information:

Compatible With Chry-sler :For V6-3.6L 3604cc
=============
2015-2017 Chry-sler 200 3.6L
2011-2021 Chry-sler 300 3.6L
2020-2021 Voyager 3.6L
2017-2022 Pacifica 3.6L
2011-2016 Town & Country 3.6L

Compatible With Do-dge :For V6-3.6L 3604cc
=============
2011-2014 Avenger 3.6L
2011-2021 Charger 3.6L
2011-2021 Durango 3.6L
2011-2019 Journey 3.6L
2011-2021 Challenger 3.6L
2011-2020 Grand Caravan 3.6L
2015-2017 Viper [For V10-8.4L]

Compatible With Je-ep :For V6-3.6L 3604cc
=============
2012-2017 Wrangler 3.6L
2018-2018 Wrangler JK 3.6L
2011-2021 Grand Cherokee 3.6L
2014-2021 Cherokee [For V6-3.2L]

Compatible With Ram :For V6-3.6L 3604cc
=============
2013-2019 Ram 1500 3.6L

Package Includes:
1 x Throttle Body - TB1163 (12-Month Warranty)

Part Specifications
Connector:6 Pin Male
Inside Diameter:2-15/16 In. (74 mm)

Complete Throttle Body Includes:
Throttle Actuator Pre-assembled
Idle Air Control (IAC)
Throttle Position Sensor (TPS)

Installation Notes

After replace the throttle body, the idle speed is usually high, unstable or the engine fault light on.

Now you need to match the throttle to the computer. The matching process actually is to clear the original memory of the ECU, and restart the self-learning.

When the computer cannot match, you can use the following manual method to match

1.Disconnect the negative pole of the battery line to eliminate the memory function of the ECU, and install it after 1 minute.
2.Turn off the ignition switch, unplug the EFI and ETCS fuses in the fuse box in the engine compartment, and put it back after 1 minute.

The above two methods are to eliminate the ECU's memory, if the idle speed is still high, ECU can return to normal speed through 1 ～ 2 days of self-learning.