Please Pay Attention:
1. This set does NOT come with a board and can NOT hold up heavy weights, please pay attention before purchase.
2. The thickness of your board is 12-14mm (about 0.47-0.55 inch) would be better, only that can make it align with your desk. The width of your board should be 20cm (7.87 inch) or more than 20 cm.
3. The black screws what we supply are designed to tighten the c clamps and the folding bracket, so it would be a little difficult to screw on, please be careful and patient.
4. If the black screws are lost or unsuitable, please contact us, we will send them to you. Don't worry.
Installation Tips:
1. Please see the installation video in this page before installation.
2. Screw the folding brackets to the c clamps at first.
3. Stretch out the folding brackets (in other words, it means that turn the folding brackets from “l” to “L”), then screw them onto the board from backside (The folding bracket are under the board). At this time, please make sure that the folding brackets line up with the edge of your board.
4. Clamp it on the desk and put the pads on the adjustable nuts to avoid slipping, then adjust the c clamps to tighten.
Specification:
Material: steel
C clamp height adjustment: 1-6 cm/ about 0.4-2.4 inch (In other words, it means that the thickness of your desk should be 1-6 cm / about 0.4-2.4 inch ).
Package:
2 x C Clamps
2 x Folding Bracket
2 x Pads
Screws
1 x Manual