The whip light can be used as a chase light, decorative lights, signal light, warning light and remind for drivers to maintain a safe distance from the rear car.

How to Use the App to Control the Led Whip Lights
1. Scanning the QR code on the control box to download the APP 'LED LAMP'.
2. Turning on your phone Bluetooth and opening the downloaded APP.
3. ISO System: Click on the product name displayed on the app's home page, and product's bluetooth will be automatically connected the App.

Wiring Method
Yellow and Blue Wires for Turn Signal Connect Positive (Signal of left or right depending on where you place the whip light on the car)
Red Wire for Brake Light Connect Positive
Black Wire for Reverse Light Connect Positive
Black Wire Connect Negative

Signal Display of Light:
Brake: Red Flashing both sides.
Reverse: White Always On both sides.
Turn Signal: Amber Progressive one side.
If you turn on the turn signal while using any light mode, both light effect will be enabled at the same time. The whip light does not support individual control.

APP Control for Modes & Functions:
There are many dynamic modes for your choices, such as jump, gradual change, flash, fixed color, and so on. And functions for choices, such as brightness adjustment 0%-100%, speed adjustment 0%-100%, voice control mode, music mode, and timing.

Product Specification:
Color: RGB
Operating Voltage: DC 12V
App Remote Distance: 0 - 12M
Operating Temperature: -20°c to 60°c
Installation Location: Vehicle Rear
Base Caliber: 0.6-inch
Drill Hole Caliber: 0.2-inch
Package includes:
2.36Ft Led Whip Light x 2
Mounting Bracket Kit x 2

Note
After receiving the product, please power on the range of voltage and current marked on it and test whether it works properly through the App control.