Fitment: For Hyundai 2012-2014 Accent, for 2013-2014 Elantra GT, for 2010-2016 Genesis Coupe, for 2011-2012 Sonata, for 2014 Sonata. For Kia 2014-2016 Cadenza, for 2010-2013 Forte, for 2011-2015 Optima, for 2011-2015 Sorento, for 2010-2013 Soul. For Mitsubishi 2012 i-MiEV, for 2014-2017 i-MiEV, for 2008-2017 Lancer, for 2014-2019 Mirage, for 2006-2020 Outlander, for 2011-2020 RVR
Pre-programmed TPMS Sensor: The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle, just activate them with TPMS scan tool. The specific operation is as follows. Step 1: Select “Check Sensor” in TPMS scan tool. Step 2-4: Select vehicle brand, model and year. Step 5: Select tire location then push button to trigger. Step 6: Wake up sensor successfully and display sensor information on screen
Features: The TPMS sensors made of 5-8 years long life's function Powerful batteries and original import chip with accurate design can work at a temperature of -40 to 121 degrees. Tire pressure sensor shell high hardness, not easy to deform, shockproof,corrosion resistance and durability. Small size, portable, good accuracy and sensitivity of sensing tire pressure, easy installation, enhance the safety of your vehicle
Function: Tire pressure monitoring system (TPMS) is an electronic system designed to monitor the air pressure inside the pneumatic tires on various types of vehicles, avoiding traffic accidents caused by tire failure, provide you with a better safety in the driving process
Notice: If your scan tool or OBD diagnostic tool cannot detect our sensor and display information such as True ID, Pressure, Frequency, Battery Status, etc., please do not attempt to replace the sensor. If you have any questions, please contact us and we will respond as soon as possible
Description
Tips:
This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool
Please DO NOT attempt to start a sensor replacement job if your scan tool or OBD diagnostic tool cannot detect our sensor to display information such as Real ID, Pressure, Frequency,battery status
Auto Relearn:
Set tyre pressure
Start the engine
On dashboard, set the system into the relearn mode
Drive until the relearn is completed
Manual Relearn:
Engage parking brake and inflate all tires
set vehicle into the relearn mode
Use tool to activate the Left Front sensor
Repeat for RF/RR/LR tires
After activate for sensor. Relearn complete, the dashboard will show the info
Relearn Procedure
OBDII connector is required
Confirm TPMS sensors are properly installed
Adjust tire pressures to placard value
Activate TPMS Tool on left front tire sidewall next to the valve stem
Repeat for RF/RR/LR tires (Spare)if required
Apply OBD connector to DLC
Turn ignition to ON, Press OK on TPMS Tool to transfer data to ECU
Disconnect OBD connector from DLC
Turn ignition to OFF then ON
Drive at 12 mph for up to 5 minutes