Specifications:

●Replacement for model No. RCO210

●Applications One size for all compressors from 1/12 hp through 1/2 hp.

●Maximum RLA 13.3 Amps

●Mounting: Quick Connect HP RATING - 1/2

●Solid-state Hard-start Relay, includes relay, overload, and start capacitor.

●Provides a boost for hard start and unbalanced systems

●Prevents low voltage starting problems

●No additional wires required

●Used For domestic and commercial refrigeration systems and freezers

Installation Instructions

1. Disconnect power supply.

2. Remove old relay and overload.

3. Push terminal connected to white wire on RCO onto start terminal of compessor
.
4. Push terminal connected to red wire on RCO onto run terminal of compressor.

5. Push terminal connected to black wore on RCO onto common terminal of compressor.

6. Connect one line wire which was removed from old relay to one of the line wrres of the RCO,using wire nut.

7. Connect other line wire which was removed from the old Overload to other line wire of the RCO,using wire nut.

Note:

Any use of the brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

The product is not sponsored or endorsed by ,or affiliated with the brands it fit ,including Supco