NOYITO INA226 Bi-Directional Current and Power Monitor Module High-Side or Low-Side Measurement with IIC Compatible Interface Senses Bus Voltages from 0V to 36V
The INA226 is a current shunt and power monitor with an IIC or SMBUS-compatible interface. The device monitors both a shunt voltage drop and bus supply voltage. Programmable calibration value, conversion times, and averaging, combined with an internal multiplier, enable direct readouts of current in amperes and power in watts.
The INA226 senses current on common-mode bus voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device operates from a single 2.7-V to 5.5-V supply, drawing a typical of 330 μA of supply current.
The device is specified over the operating temperature range between –40°C and 125°C and features up to 16 programmable addresses on the I2C-compatible interface.
Senses Bus Voltages From 0 V to 36 V ，High-Side or Low-Side Sensing . Reports Current, Voltage, and Power . High Accuracy: – 0.1% Gain Error (Max) – 10 μV Offset (Max)
NOYITO INA226 Bi-Directional Current and Power Monitor Module Document Download https://1drv.ms/b/s!AlzQUCOyZQhKgTDgLVSLOCzfCxLd?e=x51HcD
NOYITO 74HC4051 8-Channel-Mux Analog Multiplexer Selector Module
KWD 2.500
NOYITO 4-Channel Optocoupler Photoelectric Isolator Module Level Voltage Converter Module PLC Signal Converter Module PNP NPN to PNP (24V to 3.3V)
KWD 3.500
NOYITO 4-Channel Optocoupler Photoelectric Isolator Module Level Voltage Converter Module PLC Signal Converter Module PNP NPN to NPN (3.3V to 3.3V)
KWD 3
NOYITO Proto Screw Shield Assembled Terminal Point Prototype Expansion Board Opening Source Reset Button PCB Bare Board
KWD 3
