Damaged Screw Extractor Kit and Stripped Screw Extractor Set Easily and Quickly Remove All Common Sizes of Damaged, Broken or Stripped Screws.
SPECS:
Material: HSS steel
Shaft Type: Hex Shank;
Size: 0#, 1#, 2#, 3#, 4#
0) Removes screw size: 2-4mm
1) Removes screw size: 3-5mm
2) Removes screw size: 4-8mm
3) Removes screw size: 5-10mm
4) Removes screw size: 6-12mm
Easily removes screw and bolt head types from flat head, Phillips, hex, torx, square, round and other stripped screws or bolts.
FEATURES:
5 durable high hardness H.S.S. 4341 (the hardness is 63hrc) alloy steel extractors
Equipped with drill for quick removal
Ideal for stripped screws and broken bolts
Provides a 2-in-1 solution for removing damaged screws
Compatible with numerous drills
Easy to use
Comes in a plastic box for easy transport
How to Use:
Step1: Make sure to use the drill side, make sure it is counterclockwise , not too fast and not too slow, but make sure you drill deep enough.
When drilling, make sure to use some force (not too much force, but not too light force) against the screw.
Step2: Please make sure to use the extractor (Spiral) side, make sure it is counterclockwise (that is, the direction in which the screw is screwed out),
and the speed should be slow, so that the screw can be grasped.
Don't go too fast. If you can't grab the screw, try the extractor (Spiral) side of the large extractor instead, no need for a new hole.
TIPS:
* Metal chips are produced during polishing. Remove any residue before extraction.
* If the extraction thread does not bite into the screw head, switch back to the burnisher and clean more of the screw head or switch to the next larger bit size and start again at step 2.
* Operating or near power tools, please wear glasses boxes and protective clothing.