Size: length: 257mm/ 101.2inch; width: 257mm/ 101.2inch; thickness: 0.5mm/ 0.2inch.The build plate can be printed on PLA, PETG, PEEK, ABS or any filament. Pattern: the front side is pentagram film PEY and the back side is broken glass film PEF.
Application: PEY surface is recommended to be used on PLA, TPU and PETG, which can withstand high temperature up to 90°C. PEI surface is suitable to be used on PLA, PETG, ABS/TPU, ASA/PVA/PET/PC and so on, which can withstand high temperature up to 260°C, providing a stable printing platform to print on different materials.
Usage: Easy to use, just put the printing plate on the hot bed of the lab printer, then the printing bed will be adjusted automatically while the machine is switched on.
(A protective film is applied to the smooth surface at the factory)
Notice: Don't be worry about wiping the surfaces with a wet cloth and wiping them dry with a dry cloth. The pattern can appear again and it will be as clean as the first time.To avoid damaging the coating, allow the build plate to cool before removing the model.
Features: Easy to print even for a beginner, the model can be firmly attached to the print bed surface without the use of other tools, and the plate will bounce back to its flat position. the plate is manufactured from good quality spring steel sheet. Bendable, detachable, high strength, heat resistant, double sided, thicker and longer lasting.