Voltage: DC 4-30V
Current: 0-12A
Timing: 0-99 hours
Power: 0-360W
Capacity: 0-99999MAH
Electricity: 0-99999WH
Current Direction Indicator
Record the maximum power recorded
Record a maximum current measurement
Record a maximum voltage at a single point

Functional operation:
There is a button on the back of the product that can be clicked to change the display page.Double-click the button to change the display direction.Press and hold for about 3 seconds to clear the recorded timing, capacity, and power.

Asked Questions:
Question 1: Why is the product plugged in and not displayed?
Answer:Most charging products with type-c ports have no voltage out put by default and only become active when the load protocol is detected.

Question 2: My product charger is marked with 10A or 120W, why can't the test table detect 10A or 120W?
Answer:The value tested by this product is the real-time charging parameter during the charging process,and the marked on the charger is the maximum power parameter of the product.

Question 3:Will the product have a current of 0.01-0.02A without connecting to the load during use?
Answer:This product utilizes two-way current detection.It is normal to have a small current,but it can also be eliminated by pressing the button.
Elimination method:
Ensure that when no load is connected, press and hold the button and then connect type-c to 5V to the female seat.Release the button when the display screen comes out of CAL,and the machine will automatically eliminate the idle current.

Package include:
2 x Type c voltage and current tester meter