Search

Search

Bowden PTFE Tubing 1M Fit for Ender 3 Ender 5 / CR-10 CR-20 Series / 1.75mm Filament with Tube Cutter, 2 X KJH04-M6, and 2 X PC4-M10 Joints, 3D Printer Extruder Fitting

KWD 4.500
Brand
DiGiYes
Weight
71 g
– 1 +

Special Features

  • -- This Bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher temperatures than any other tubes, making it ideal for printing specialty filaments such as ABS, nylon, and polycarbonate. This PTFE tube can keep working at temperatures up to 340 degrees Celsius.
  • -- Tube length: 1 meter, inner diameter: 2mm, outer diameter: 4mm. The optimal inner diameter size is designed to reduce "wiggle room" or bending in the tube.
  • -- Two KJH04-M6 extruder joints and two hot end PC4-M10 joints are suitable for PTFE tube with an inner diameter of 2mm and an outer diameter of 4mm. H59 copper material, with galvanized surface treatment.
  • -- 1 tube cutter that can cut both sides of the feed pipe flat to prevent any malfunctions or heat spread during the feeding and retraction process. It can also cut various PTFE pipes and PE pipes.
  • -- Designed for 1.75mm filament, tubing has extremely accurate inner & outer diameters, and filament loads smoothly into the hotend with as little room for error as possible between the extruder and the hotend.

Description

Parameter Information:
Material: PTFE, Copper
Outside Diameter: 4mm
Inside Diameter: 2mm
Place of Application:
- Fit for Creality Ender 3 Ender 5 CR-10 CR-20 series and other similar 3D printers.
Package Include:
1 x 1m PTFE Tube
2 x KJH04-M6 Joints
2 x PC4-M10 Joints
1 x Tube Cutter

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}