بحث

بحث

لوحة بناء طابعة FYSETC Elego Neptune4 Max ثلاثية الأبعاد مقاس 430x430 - سرير طباعة PEI PET فقط: لوح سطح طباعة فولاذي ناعم ومزدوج الجوانب يناسب Elego Neptune3 Max Anycubi Kobra2 Max CR-6 SE

عذرا، هذا المنتج غير متوفر

مميزات خاصة

  • 1. Elego Neptune4 Max Bed Top Plate Replacement: Only Removable steel spring, NOT include the Magentic base plate, then you can use your stock to hold the plate in place on the bed, no need for an ever-growing collection and reduce cost. This Large heated bed top cover fit Elego Neptune3 Max / Neptune4 Max, Anycubi Kobra Max / 2 Max, Crealty CR-6 Max 3D printers which owns a printing volume 420x420. Not recommend to use without magets. Spare for our 430x430 PEI sheet kit (Asin: B0D8WHK1W8).
  • 2. Upgraded 430x430mm Bed Adhesion Fixed: One side is coated a clear smooth PET sheet, which exhibits a pattern resembling carbonfiber. The intersection of gloss and matte surfaces forms a striped pattern, creating a three-dimensional and orderly print surface with a distinctive texture. An ideal surface for low-temp filaments PLA and PETG. Another side is with heat and wear-resistant, frosted PEI powder coating, the plate surface is not easy to get scratched or damaged.
  • 3. Excellent adhesion for first layer: The model can be firmly attached to the surface of the print bed. Easily print even for a newbie using on a well-tuned printer. For example, setting a Z value -0.945 or -0.930 on Prusa i3 MK3S+ is OK. If too low, filament buildup or no extrusion, print head nozzle easily scratch the surface. If too high, the prints come off the bedplate, messing things up. Turn OFF the cooling fan and Slow down the speed at 10-25mm/s when going on the first few layers.
  • 4. 430x430 Bed Plate Use: Attention should be paid to the nozzle-to-surface distance to prevent permanent scars. Regular cleaning with alcoholl or a cleaning agent is great to maintain surface cleanliness. Dirt and oil stains can reduce print adhesion and affect the clarity of the carbonfiber-like pattern. A Clean surface, a roll of Dry filaments or Adding Brims may help get your 3d printing project a cool smooth finish. Also recommend to keep it stored Separately for protection when not in use.
  • 5. Easy to Remove and use: Put the printing plate onto the printer hot bed, then the bed leveling sensor will automatically go on while machine powered on. Slightly bend the plate for model removal without any help of tools. And the plate will return to flatness, which is made of high quality spring steel plate. Flexible, removable, high strength and heat resistance. Total Thickness is about 0.7mm, thicker enough and longer service lifespan than others.

وصف

What's in the package?
430x430mm PET PEI Build Plate Only, compatible with Large Elegooo Neptune3 Max / Neptune4 Max, AnycubicKobra Max / Kobra2 Max, Creallity CR-6 SE 3D printer's heated bed. Not comes with the matching magletic base. Please make sure you own the magentic sticker or magentic ultrabase on the print platform.
As a top print surface for the hot bed double-sided Textured 430x430 with magentic base (Asin: B0D8WHK1W8) at our shop.

High Resistance and Compatible Filaments:
The PET print bed surface is resistant to high temperature 150°C and textured PEI coating bed is 300℃. After our extensive testing, we recommend PET to print PLA / TPU /PETG，If you want to print other filaments, please adjust the parameters. And It is good to print PLA/PLA+/PETG/PETGCF/ABS/TPU/Nylon/PC/PA/ASA/PVA on PEI surface.

Cool effect:
Very fun upgrade for your printer. Works great, leaves the exact design its supposed to, the designs transfer beautifully.
No need glue stick, no tape, but no adhesion issues. Glue will dilute the texture so would advise a brim at most. A great printbed for PLA prints that could use a nice design other than the usual textured PEI sheets. For stable frosty texture, just flipping the plate over to print on the golden side. Both sides magent and work properly.

منتجات شبيهه