Kobra 3 Combo K3C H1H Build Plate, Smooth PEO and Multicolor Circle Sticker Steel Plate, Transfer Patterns to 3D Printing Item, 256x268mm/ 10.07x10.55inchs Spring Flexiable Removable Print Bed

After changing to our steel plate, Each time you make a print, you must first perform an auto-leveling please, and then compensate the Z-axis off set(0.04mm) of the machine, (the reason of the machine, not the steel plate).
High temperature resistant, suitable for printing many kinds of filament, please use the Quiet Mode when printing the first layer to make sure the first layer is printed correctly. After 4-5 layers, you can switch to other modes.
Please remove the front and back film before printing. Before each printing, please make sure the surface of the steel plate is free from any impurities, especially fingerprints and grease, if so, please clean it thoroughly with isopropyl and wipe it with a lint-free paper towel. Immediately after each print, please clean thoroughly with isopropyl and wipe with a lint-free paper towel and store in a dust-free space.
Suitable for Kobra 3 Combo only, if you encounter any problems in using it, please feel free to contact us, customer support is available online every day!
If you receive a scratched steel plate that has just been delivered (which can only happen during transportation), please request an exchange or contact us immediately!

What do you get?

1 piece 256x268 mm Smooth PEO and Multicolor Circle Sticker Spring Steel Sheet.

Hello,