High and low temperature resistant silicone rubber self-adhesive tape 50MM*0.8MM*5000MM green

Scope of application
Used in high-voltage substation insulation protection: copper row, tube mother surface insulation, pile head, flexible connection, reactor and other shaped structure insulation protection;
Used for the insulation protection of the bare leakage point of the power switchgear outlet line, the bare leakage point of the main busbar of the load cabinet, the overlap of copper rows of the distribution network equipment, the copper rows and terminals of the transformer in the cabinet, and the copper rows of the high-voltage cabinets;
Insulation sealing protection for intermediate joints and connections in the electric power field;
insulation sealing protection for the insulation layer and shielding layer of large electrical facilities;
andInsulation protection for exposed metal of power conductors;
Sealing protection for overhead line clamps;
local insulation reinforcement of overhead lines due to insufficient safety distances;
Other related to electricity and waterproofing, such as high-speed railroad, ships and other fields.

Instructions for use
1. Dust and clean the insulated area before construction.
2. Cut open the plastic package from any three sides and take out the self-adhesive silicone insulation tape.
3. remove the tape's isolation film, in accordance with the bottom to the top, from the equipment connection point to the conductor or bus bar direction winding.
4. Silicone rubber insulating self-adhesive tape is not positive and negative points, winding must be unfolded flat, can not be wrinkled or overlap.
5. Stretch the tape 1~2 times, keep the proper elasticity against the wrapped object for winding, the first circle completely overlap winding, and then according to the 1/2 lap forward winding.
6. At the end of the winding, it must be a smooth plane or arc surface without protrusion, stretching and must be lapped back to the body. Press firmly for 2-3 seconds until the contact surface of the body is completely bonded without gaps.