Search

PATIKIL Expansion Hook M10 2 Pack 304 Stainless Steel Concrete Wall Hook Screw Open Cup Hooks for Concrete Brick Stone Ceiling Hanging Silver

KWD 4.500

Brand
PATIKIL
Category
Hooks
Weight
199 g
SizeM10
Item Package Quantity2
1 +

Special Features

  • Size: M10; Color: Silver; Material: 304 Stainless Steel; Total Length: 121 mm / 4.8 inch; Tube Size: 45 x 14 mm / 1.8 x 0.6 inch; Screw Diameter: 9 mm / 0.35 inch; Packing List: 4Pcs x M10 Expansion Hook
  • Advantage: 1. This Expansion Hook is made of 304 stainless steel. It has a strong structure and strong bearing capacity. It is rust-proof and corrosion-resistant. It is durable and can be used for a long time. 2. This hook does not require complicated operations and is easy to install. Expansion is produced by tightening the bolt, which pulls on the tapered cone, causing the sleeve to expand against the hole wall.
  • Instruction: 1. Remove the washers and nuts. 2. Put the screw into the hole, put the washer and nut in order, and then re-tighten the nut.
  • Expansion Hooks can be used in fastening fences, awnings, air conditioners, cement bricks, concrete masonry, ceilings, burglarproof, doors and window canopies, fixation, home decoration, and engineering.
  • NOTE: Please pay attention to the required size when purchasing.

Description

Expansion Hooks can be used in fastening fences, awnings, air conditioners, cement bricks, concrete masonry, ceilings, burglarproof, doors and window canopies, fixation, home decoration, and engineering.

Specification
Size: M10
Color: Silver
Material: 304 Stainless Steel
Total Length: 121 mm / 4.8 inch
Tube Size: 45 x 14 mm / 1.8 x 0.6 inch
Screw Diameter: 9 mm / 0.35 inch
Packing List: 2Pcs x M10 Expansion Hook

Advantage
1. This Expansion Hook is made of 304 stainless steel. It has a strong structure and strong bearing capacity. It is rust-proof and corrosion-resistant. It is durable and can be used for a long time.
2. This hook does not require complicated operations and is easy to install. Expansion is produced by tightening the bolt, which pulls on the tapered cone, causing the sleeve to expand against the hole wall.

Instruction
1. Remove the washers and nuts.
2. Put the screw into the hole, put the washer and nut in order, and then re-tighten the nut.

NOTE: Please pay attention to the required size when purchasing.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}