Seco-Larm SD-927PKC-NEVQ Pack of 2 Enforcer Wave-To-Open Sensor with Manual Override Button, Stainless Steel Single-gang Plate, LED Illuminated Sensor Area, Range Adjustable, Dual 12-24VAC/VDC The ENFORCER Wave-To-Open Sensors use IR technology to request egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is ideal for use in hospitals, clinics, labs, cleanrooms, schools, factories, or offices. The SD-927PKC-NEVQ adds a manual override button Key Features: - ETL, Conforms to UL Std. 294 - Dual voltage, 1224 VAC/VDC - Range adjustable from 2.37" to 8" - Stainless steel single-gang plate - 3A relay, adjustable from 0.5 to 30 sec, toggle, or as long as hand is near the sensor - LED illuminated sensor area for easy identification - Quick connect screw-less terminal block - Selectable LED colors (turns from red to green or green to red) when activated - Adds manual override button as a backup to the sensor Specifications: - Operating Voltage: 1224 VAC/VDC - Current Draw: 120mA@12VDC - Relay Type: Form C dry contact, 3A@24VDC - Override Button: Switching capacity: 3A@24VDC, Mechanical life: 500,000 cycles - Response Time: 10ms - LEDs: Standby: Red, Triggered: Green - Output Duration: Adjustable, 0.530 sec., toggle, or as long as sensor is triggered - Sensing range: Adjustable, 2.37" to 8" (6-20 cm) - Destructive Attack Level: Level I - Line Security: Level I - Endurance Level: Level IV - Standby Power: Level I - Overall Dimensions: 4.52 x 2.75 x 1.31 inches - Weight: 0.22 pounds