★Product Specification:
The YZMSZ feed water Adapter connects between the cold water Supply multi-turn angle valve
and flexible riser pipe, to the main water Supply, for applications in reverse osmosis filtration systems,
automatic coffee brewers, ice makers and many more.
That fit standard 1/2 angle stop adapter valves under kitchen and bathroom sinks.
All the metal in the wading area is made of lead-free copper.
You don‘t need to pay costly plumbers or use any complicated tools to easily complete the installation for RO system feed,
water filter system feed, soda fountain, coffee brewer, bridge connection, etc.
★Installation:
1. Turn off the Cold Water shut-off Valve.
2. Turn on the Faucet to release any pressure. Disconnect the Existing Faucet Connector Pipe.
3. Make sure the O-ring is seated inside the Feed Water Adapter female end then Twist it onto the Cold Water Supply Valve.
4. Twist the Existing Faucet Connector onto the male end of the Feed Water Adapter.
5. Turn off the Feed Water Valve. Turn on the Cold Water Supply Valve slowly, ensure you are getting a proper seal.
6. Connect the 1/4” tubing to the push-fit side of the Feed Water Adapter. Open valves and check for leaks.
★Precautions:
1/4" tubing must be inserted into the feed adapter valve 0.67 inch to avoid leakage. ★Package Include:
SIZE:1/2" Male thread(Diamater 20.0mm) x 1/2" female Thread(Inner diameter 18.9mm) x 1/4" O.D. tubing(Plastic Tubing only) Feed Water Adapter,1pcs.