Materials: Body: ABS/POM, Blade: Stainless; Outside Dimensions (W/D/H): 1.5 x 1.5 x 0.9in / 38 x 38 x 24mm
Good Protection: A great way to store your single bobbin (T-B1015W) created by Kokuyo Bobbin Washi Tape Mini Roll Maker (T-BR101W). It completely encloses the tape so you don't have to worry about it getting dirty.
Easy to Set: Press the release buttons on both sides to open the case. Install the bobbin with the 6-hole side down. Before installing the bobbin, pull off a decent length of tape and make sure to pull the tape through the rollers, and then close the case.
Easy to Cut: Simply twist the bottom ridged piece clockwise to extend the tape and pull it against the serrated cutter to cut it. The non-sticky side is the side that gets cut, so you don't have to worry about the blade getting gunked up. It's easy to cut a piece of tape whenever you need one.
Note: Make sure not to overextend the tape! If you wind it counterclockwide, the case will simply colse. You will have to rewind it manually.