Annoying nozzle changes getting you down? Use the Nozzle Torque Wrench to wrench away your leaky nozzle woes. The rotary slip mechanism is set to 1.5 Nm, the exact torque you need to get that nice seal when tightening your nozzles, and uses a standard 1/4” drive. Designed to fit the Slice Engineering Vanadium Nozzles without an adapter, as our nozzles have a 6 mm hex (that's a little under 1/4” for those that don't speak Metric), with a little wiggle room for that stubborn adhered plastic. The Nozzle Torque Wrench will fit any other nozzles when used in combination with a hex-to-square drive adapter and appropriately sized socket.