1. Upgraded Prusa Bed for Original MK4: The plate comes with a different hologram design on each side. One side is a Light beam pattern, which dances in the space like neon-like light strips, vividly displaying natural colors and light with its soft arcs. Another side is a phantom style, which seems to be a subtle fusion of reality and dream, creating a fascinating illusion and stunning look. The pattern that gets transferred is very cool, smooth and pretty. Good adhesion. Clean smooth finish.
2. Great adhesion for first printing layer: An appropriate Z value is VERY important. Adjusting Z value -0.930 or -0.945 on Prusa i3 MK3S+, no glue stick or tape or hairsprayy. If print head nozzle too low, filament buildup or no extrusion on print surface, easily scratch the bed. If too high, prints come off the printbed, messing thing up. Turn OFF the cooling fan and Slow down the print speed when going on the first few layers. A clean surface, a dry filament or adding Brims also work.
3. Prusa MK4 Build Plate Attention: Given the fragile nature of the surface, it's necessary to keep it stored Separately for protection when not in use to avoid getting scratched. But, if treated well and used on a well-tuned printer, it should provide a great number of amazing looking prints. YES, this plate easily shows contamination from fingerprints and the like, the holograms disappear wherever youve left a deposit. So recommend to wear gloves Or Clean it with alcoholl before printing.
4. Very fun upgrade for your printer: Holographic build plate Prusa heated bed cover, the MK3.9/MK4 load cell based system works well on the sheet. The H1H print bed surface is resistant to high temperature 200°C. After extensive testing, we recommend H1H to print PLA/TPU/PETG. If you want to print other filaments, please adjust the parameters. A great printbed for PLA print that could use a nice design other than the usual frosted textured PEI sheets. Easily remove the 3d printing project.
5. Awesome Textures, Cool Effect: This build plate is pretty awesome. You get the best results with a dark colored PLA PETG. The designs imprint quite nicely on the parts, for decorative pieces, it give a nice extra bit of eye candy. For any prints that expose the bottom print area this bed makes a difference. The adhesion is decent, not to the adhesion of a PEI smooth sheet but the parts still stick well, make sure your printer is tuned very well first. Both sides magent and work properly.
FYSETC 3D Printer Upgrade Magletic Build Surface 160X130 mm/ 6.2X5.1inch 2 in 1 Flexible Hotbed Build Plate with Adhesive Backing for Monopri Select Mini V2/ V1/ Pro/V3/ Malyan M200
KWD 6.500
FYSETC Prus MK3 Heated Bed Spacer Aluminum Spacer Kit for MK3 Y Carriage 1 Set/ 9 pcs 6x6x3 mm Spacer with 9 pcs M3 Screws and Wrench for Prus MK3 3D Printer Hot Bed 6x6x3t Spacer
KWD 4.500
Upgrade Stepper Motor Driver Heatsink, FYSETC 10pcs 3D Printer Parts Anodized Aluminum Heatsink 3D Printer Cooler for Raspberry Pi LV8729 A4988 DRV8825 TMC2208 TMC2100 TMC2130 Driver Module, Blue
KWD 4
FYSETC 3D Printer Parts Vorn Steathburner Extruder Head SB CW2 Hotend Hardware Kit No Printed Parts with 36mm Motor Cooling Fan Compatible with Vorn 2.4 /Triden/Switchwire/Vorn 1.8
KWD 21
