Overflow Detection Function: The default wiring is water ingress detection. If you want the overflow detection function. What you need to have power on the alarm output terminals, the C terminal on the pump output and the C terminal on the alarm output need to be connected. Then connected them with a wire. Next you have the overflow working properly as described in the documentation, the black wire from the sensor needs to be moved and connected to the blue terminal together with the blue wire.
Intelligent Control: When the liquid level of the container is too low, the low liquid level alarm from the low liquid level sensor is triggered to the controller to close the relay to start the to add liquid level. When the liquid level reaches a certain height, the high liquid level sensor sends a to the controller to disconnect the relay to automatically stop the . You can use the controller to either to fill or empty a .
Non Induction Probe: Water level controller adopts non capacitance induction technology and special induction control chip design, the probe is , strong anti interference ability, sensitive induction, no with liquid, safety, environmental and no pollution.
Wide Voltage Power Supply: Relay dry output, the controller can be applied to a variety of load. With Control diversification, water level controller can control the pump in manual or automatic mode.
Easy to Install: The installation is simple and convenient. Water level controller can be screwed and installed, also can be installed on the electrical box track.
Infrared Liquid Level Sensor Water Level Detection Dual Level Alarm Control Module AC85V to 265V 100MΩ for Laboratory Automatic Water Filling System of Fish Tank
KWD 8.500
DC3.3‑5V Ultrasonic Distance Sensor Waterproof Shell Ultrasonic Distance Module RS485 Output Distance Detection Sensor 3-450cm/1.2-177.2in Range
KWD 9.500
5V Ultrasonic Wave Distance Measuring Board Ranging Module with Waterproof Sensor
KWD 4
Light Curtain Sensor Switch Light Grating Security Device High Quality Safety Light Screen Sensor DC10-30V(12 Beams BEM1240-C-440NB)
KWD 50.500
