Search

Search

5Pcs 1 Channel 5V Relay Module with Optocoupler Isolation Supports High or Low Level Trigger 1-Way 5V Red Board Expansion Board

KWD 3.500
Brand
EC Buying
Weight
90 g
– 1 +

Special Features

  • This relay module uses a patch optocoupler for isolation, and each circuit can be triggered at a high or low level via a jumper
  • Strong driving ability, requiring only 5mA of current to drive a relay with a control ability of 10A
  • The interface design is user-friendly, and all interfaces can be directly connected and led out through wiring terminals, which is very convenient
  • Module size: 50mm * 26mm* 18.5mm (L * W * H); It is provided with 4 fixing bolt holes, holes 3.1mm, spacing 44.5mm*20.5mm
  • Stable performance, suitable for various microcontroller control, can be widely used in various power control occasions

Description

Product parameters
Working voltage: 5V
Quiescent current: 5mA
MAX current: 190mA
Trigger voltage: Low: 0; High: 5V
Trigger current: 2-4mA
MAX load: AC250V/10A, DC30V/10A
Module size: 50mm * 26mm* 18.5 mm/1.97inch * 1.02inch * 0.73inch (L * W * H)
Equipped with 4 fixing bolt holes, with an aperture of 3.1mm/0.12inch and a spacing of 44.5mm * 20.5mm/1.75inch * 0.81inch
Power indicator (green), 4-way relay status indicator (red)

Module interface:
DC+: connects to the positive terminal of the power supply DC-: connects to the negative terminal of the power supply IN: Can be high or low level control relay pull-in Relay output: NO: Normally open interface of the relay. The relay is suspended before closing and shorted with COM after pull-in COM: Common interface of relay NC: Normally closed interface of a relay, short connected with COM before relay closing, suspended after pull-in

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}