Mid-power LED array provides a uniform light source with high efficiency, long life, and no pixilation. 90+ CRI minimum, R9 greater than 50. Color accuracy at 4 SDCM in between endpoints provides color consistency and uniformity Optical Assembly. Optical assembly provides wide light distribution – useful for general area and task lighting. Diffuse injection molded lens with smooth flat profile. Meets ENERGY STAR® color angular uniformity requirementIntegral 120V 60Hz constant current driver provides noise-free, high- efficiency operation. Continuous, flicker-free dimming from 100% to 10% with compatible leading or trailing edge (LE/TE) 120V phase cut dimmers. (See Dimming Guide for compatible dimmers.) Tip: For optimal dimming performance, consider dimmers with low-end trim adjustment. Note that some dimmers require a neutral wire in the box. Includes inline electrical orange LED Quick Connect and E26 medium socket adapter for mains connection. Preinstalled steel torsion springs hold the module securely in the housing (requires torsion spring receivers). Ships with torsion springs in the 6” position, adjusts to 5” position with two Phillips-head screws Trim. The one-piece step baffle and self-flanged trim ring provide lens regression and reduce light leaks. Injection molded plastic construction is impact[1]resistant and non-corrosive. Non-conductive construction meets most local dead-front code requirements. Not included – due the HALO LT/LTE design, a gasket is not required to achieve AIR-TITE code requirements (caulking can be used for additional sealing if necessary for local code)