Search

Search

JANSANE SCT-013-000 100A Non-invasive AC Current Sensor Split-Core Clamp Current Transformer

KWD 5.500
Brand
JANSANE
Category
Sensors
Weight
59 g
– 1 +

Special Features

  • This SCT-013-000 ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation.
  • This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi.
  • Use this 100a current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load.
  • Input Current: 100a AC; Length of Leading Wire: 1m; Two Form of Output: current output or voltage output (burden resistor needed to add); Cable Jack: 3.5mm (like a headphone jack).
  • Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and over-current protection.

Description

Specification
Model: SCT-013-000
Core Material: Ferrite
Input Current: 100a AC
Leading Wire in Length: 1.5m
Opening Size: 0.51 * 0.51inch / 13 x 13mm
Turns Ratio: 1: 1800
Resistance Grade: Grade B
Max Sampling Resistance: 10 Ω
Linearity: ±3%
Accuracy: ±1%
Work Frequency: 50-1 KHz
Work Temperature: -25˚C ~ 70˚C
Reference project: Open Energy Monitor
Dielectric Strength: 6000V AC/1min
Two Form of Output: current output or voltage output (voltage output built-in the sampling resistor);
Mechanical strength: opening and closing times, no less than 1000 times (20 ℃) High Quality and Safe: Meet the requirement of flame-retardant characteristics (UL94-V0)

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}