Installation:
Unpack and place the centrifuge on a solid and level work bench.
Keep proper working condition.Keep the ambient temperature at 15°C-25°C.
No exposure to direct sunlight or extreme temperature higher than 30°C.
Keep a distance more than 10cm from other objects to facilitate ventilation
Keep the centrifuge from heat source,liquid or chemicals while operating.
Program Settings
1,Press P1 or P2 button to load the corresponding predefined program settings.Press and hold P1 to P2 button to activate the edit mode. Press P1/ P2 buttons to switch between speed,timer anad RCF parameters. Rotate the knob to adjust the parameter. Wait for 7 seconds and the settings of the corresponding program will be upadated.
2. Or rotate the knob cycle between speed,RCF and timer settings,Press the knob to edit the current settings,The speed,RCF or timer will blink on the display,indicating which settings is currently being edited. Rotate the knob clockwise to increase the parameter and counter-clockwise to decrease it.
3.Adjust the speed from down to 300 rpm by steps of 10 rpm.Adjust the timer from 30 seconds to 99 minutes or disable it by setting it to HD
4.Press and hold the knob for 5 seconds,after a beep sound,you can adjust the deceleration between 2 levels by rotating the knob.