Search

Isuzu Vacuum Pump 8975481860 for Isuzu NPR NQR N-Series I-Series Gas Engines Trucks 2020.5 2021 2022 2023, Replaces Part# 290KT00030 97780770 97548186 Updated Belt-Driven Vacuum Pumps

KWD 29
KWD 34

Brand
SOASEMBE
Weight
1.8 kg
1 +

Special Features

  • 【COMPATIBLE WITH】This vacuum pump is compatible with ISUZU NPR NQR N-Series I-Series 2020.5+ Gas Engines Trucks,Pls note that Isuzu will start using this new type of pump for your gas powered 2020.5+ Isuzu NPR medium duty truck. If you have a pre-2020.5 truck and wish to retain the original vacuum pump setup and use your original flat pulley, see another liriuda's isuzu npr vacuum pump 8-97241-035-1 in our Amazon Store
  • 【REPLACE PART NUMBER】Engine:Gas engines only; Drive Type:Belt Driven; Replaces part# 290KT00030, 2-90KT0-003-0, 8975481860, 8-97548-186-0, 97548186, 97780770, 8-97656-980-0 Isuzu npr Brake Vacuum Pump
  • 【UPGRADED VACUUM PUMP】The updated belt-driven vacuum pump has a longer snout and shaft than the previous design allowing for more robust bearing support of the shaft and greater durability,This 290KT00030 vacuum pump can be retrofitted to trucks back to 2008 but will require use of a deep offset / dish type pulley
  • 【NOTICE】This pump is NOT the same as the original pump for the 6.6L application (Part numbers 97656980 / 8-97656-980-0).This new style pump will work in place of the original pump. It is totally identical to the original except for the location of the breather / fresh air line. Installing this Isuzu pump on a 6.6L will cause the breather line connector to be very close to the engine, but it is workable and will allow you to get your truck up and running

Description

Fitment:

Fit for Isuzu NPR NQR N-Series 2020.5+ (i series) Gas Engines Only

Replace Part Number

97548186

97780770

290KT00030

8975481860

8-97656-980-0

Check the number for reference, but more important, read the detail description to match the fitment

Important Note:

This pump is NOT 100% same as the original pump for the 6.6L application (OE: 97656980). New pump will work in place of the original pump. It is totally identical to the original except for the location of the breather / fresh air line.

Installing this pump on a 6.6L will cause the breather line connector to be very close to the engine, but it is workable and will allow you to get your truck up and running!

Different from the previous version, The new pump has a longer snout and shaft allowing for more robust bearing support of the shaft and greater durability.

This pump technically can be retrofitted to trucks back to 2008 but will require use of a deep offset / dish type pulley.

Some upfitted trucks have an additional belt in front of the main factory serpentine belt to run other accessories such as hydraulic pumps. In these situations this new style vacuum pump won't work because the longer shaft physically interferes with the extra drive belt.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}