Search

Search

3pcs ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision ADC Converter Development Board for Raspberry Pi Pre-Soldered

KWD 7
Brand
AOICRIE
Weight
10 g
– 1 +

Special Features

  • 【ADS1115 16 Bit Analog-to-Digital-Converter】 High accuracy, programmable gain amplifier (PGA), four differential input channels, and internal oscillator for a variety of measurement and control applications.
  • 【Programmable Gain Amplifier (PGA)】The gain of the input signal can be adjusted in steps of 1/2, 1/4, 1/8 or 1/16. This makes it suitable for applications with different input signals.
  • 【Low Current Consumption】The ADS1115 is designed to consume very little power. In Continuous Mode, it draws a mere 150µA, and in Single-Shot Mode, it intelligently enters Auto Shut-Down, ensuring minimal power usage when not actively converting analog signals.
  • 【Wide Supply Rrange】The voltage reference of these 16 bit ADC 4 channel module ranging from 2.0V to 5.5V, compatible with Raspberry Pi and other common microcontrollers.
  • 【ADS1115 Pre-Soldered】Solderless! Pins are already attached. Ready to plug in and go.

Description

ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter

Specifications:
ADC Bit rate: 16 Bit
Interface Type: I2C
Channels: 4 Channel AN0 AN1 AN2 AN3
Input voltage: 2.0v-5.5v
Channel input voltage : 0-VDD
Continuous Mode: Only 150μA
Single-Shot Mode: Auto Shut Down
Programmable data rate: 8sps-860sps
Input range programmed control, 7 types
input ranges: -0.256V ~ + 0.256V, -0.512V ~ + 0.512V, -1.024V ~ + 1.024V, -2.048V ~ + 2.048V, -4.096V ~ + 4.096 V, -6.144V ~ + 6.144V I2C 7-bit addresses between 0x48-0x4B

The ADS1115 provides 16-bit precision at 3300 samples/second over I2C.
I2C Analog-to-Digital Converter even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range.
Interfacing is done via I2C. Simply connect GND to ground, VDD to your logic power supply, and SCL/SDA to your microcontroller's I2C port and run the example code to start reading data.
ADC Converter can help you use sensors such as, infrared or photodiodes, which provide analog values.

Package Included: 3 * ADS1115 16 Bit 4 Channel Analog-to-Digital ADC Converter

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}