Search

Search

Nema 17 Pancake Stepper Motor 28.33oz-in 1.2A 30mm Bipolar 1.8 Degree 4-Lead for 3D Printer CNC Extruder

KWD 4.500
Brand
MybotOnline
Weight
181 g
– 1 +

Special Features

  • NEMA 17 stepper motor, up to 45.33oz-in(32Ncm) holding torque, low noise, low step loss and low cost
  • Rated current: 1.2A. Phase Resistance: 3.4 ohms. Step angle: 1.8°(200 steps/rev). Frame size: 1.65"(42 mm), square body. Full D-cut shaft length: 0.87", shaft diameter: Φ0.197"
  • 39.37"(1m) 4-pin cable and 2.54mm(0.1") connector. Using M3 screws, easy to set. Connection: Red(A+), Blue(A-), Black(B+), Green(B-) Tips: Not only swap your old motor out but aslo the wire
  • RoHS and CE Certified. Easy to install. Tightly packed in cut foam
  • Widely used for 3D printer, CNC milling, small robotics, stage lighting, laser engraving, textile machinery, medical equipment, placement machine, automation equipment. After-sales Service: , defective motor free replacement or refund. Any question feel free to message or QA us, we and our engineers will try our best to assist you

Description

Short Body Nema 17 42mm 2-phase 4-wire hybrid DC stepper motor, used in various types of equipment for accurate rotation angle and speed control, compact body with high torque and smooth motion, popular choice for DIY maker and 3d printer

Electrical Specification:

* Manufacturer Part Number: MY-17HS13-1204S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 45.33oz-in(32Ncm)
* Rated Current/phase: 1.2A
* Phase Resistance: 3.4ohms
* Inductance: 5mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 1.65 x 1.65 inches(42 x 42 mm)
* Body Length: 1.34 inches(34 mm)
* Shaft Diameter: Φ0.197 inch(Φ5 mm)
* Shaft Length: 0.87 inch(22 mm)
* D-cut Shaft Length: 0.71 inch(18 mm)
* Number of Leads: 4
* Lead Length: 39.37 inches(1000 mm)
* Weight: 8.11oz(230 g)

Connection:

Red(A+), Blue(A-), Black(B+), Green(B-)

Warning:

Connecting the motor directly to a power supply can destroy the motor.

Make sure the motor connect to a constant current or chopper drive controller before test.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}