Seco-Larm E-960-D90GQ Twin Photobeam Detector with Laser Beam Alignment, 10ms Interupt Speed, Non-polarized Power Inputs, Anti-frost System, NO/NC Trigger Output, Weatherproof, 650nm Laser Wavelength
ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security, both indoors and outdoors.
Key FeaturesTwin beams minimize false alarms from falling leaves, birds, etc.
Lensed optics reinforces beam strength and provides excellent immunity to false alarms due to rain, snow, mist, etc.
Weatherproof, sunlight-filtering case
Non-polarized power inputs
Anti-frost system
Automatic input power filtering with special noise rejection circuitry
NO/NC trigger output
N.C. tamper circuit included
U brackets included for pole mounting
Quick, easy installation with built-in laser beam alignment system
Monitored output: N.C. or 10kΩ resistor on N.O. output
SpecificationsCurrent Draw: 50mA max (laser align only). 150mA max. (active operation excluding laser alignment)
Sensing Range: Outdoor - 90' (30m), Indoor- 190' (60m)
Operating Voltage: 12~30 VDC/VAC 60Hz, 200mA
Interupt Speed: 10ms
LEDs - Red: "ON" indicates transmitter and receiver not aligned or beam is broken
LEDs - Yellow: ON indicates weak receiver signal or beam is broken
LEDs - Green: ON indicates unit connected to power
Alarm Output: SPDT NO/NC/COM relay, 1A@30VDC/VAC
Tamper Output: N.C. switch, 1A@30VDC/VAC
Case material: PC Resin
Laser Wavelength: 650nm
Operating Temperature: -13º~+131ºF (-25º~+55ºC)
Laser Output Power:
Alignment Angle: Horizontal (+/-)90º, Vertical: (+/-)5º
Weight: 2.5-lb (1.1kg)