【 Attention 】The use of desiccants can reduce the moisture of 3D printing filaments. Each package weighs approximately 23g. It should be noted that desiccants can only reduce the moisture content of consumables and cannot dry consumables that have already been dampened.
【When does it need to be replaced】If it is new, the desiccant will be a white powder. When the desiccant absorbs moisture, it gradually turns into a yellow,When the entire packaging turns yellow, it is necessary to replace,because it loses theability to keep the flament dry,We also recommend re drying theflament at this time.
【How to use】1. Please take 2-3 new desiccant bags, remove the plastic film from the desiccant;2. Fold the desiccant in half and Put it into the hole of AMS and cover it with a lid. 3.Close the AMS cover to keep the filament dry. Please ensure that the locking tabs on the AMS are closed to isolate the AMS from external air.
【Why do we need desiccants】The interlayer adhesion of wet flament will deteriorate,which directlyaffecting the printing quality, even prone to blockage during theprinting process, and diffcult to adhere to the hotbed and leads toprinting failure.Prevent the above situations from happening during printing, make printing smoother, save your time, and improve your happiness for your hobbies or work！
【All filament need it】These desiccants can be used not only for Bambu Lab 3D printers, but also for any user who uses filament.The damp filament loses its flexibility and is relatively fragile, making it prone to breakage during the printing process; And it can also cause inconsistencies in the extruded filaments, making dry filaments very important. Dry filaments can help you print better.
Polymaker Matte PLA Filament 1.75mm Bundle 2x1kg, Matte Black PLA Filament Bundle - PolyTerra PLA 3D Printer Filament Bundle 2 Rolls PLA Filament Pack
KWD 16.500
Starborn Pro Plug System Wood Deck Kit with 100 Ipe Plugs, 2-1/2" SS Screws, Nozzle and Bit - Pws08133010
KWD 22.500
eSUN Water Soluble PVA Filament 1.75mm, 3D Printer Filament PVA, 0.5KG Spool 3D Printing Filament for 3D Printers, Natural
KWD 16
-7%
2.85mm Silk Antique Gold PLA Filament 3mm 3D Printer Filament 1KG 2.2LBS Printing Material Silky Gold Filament Metallic Bronze Brass PLA Filaments Materials Shiny Silk PLA
KWD 7
