Specifications:
-Stroke Length:16"/ 400mm
-Input Voltage: 12V DC
-Max Push Load: 3000N / 660lbs
-Travel Speed: 5mm/s(No Load);3.5mm/s(Load)
-Package size:13 x 3.78 x 1.89inch / 32.5 x 9.5 x 5cm
-Package weight:3.1pound / 1400g
Package List:
-1xStroke Linear Actuator(with a wire)
-1xRemote Controller
-2xMounting Bracket
-2xFastener
-Other Accessories Required
How to install
1.Prepare to connect the two wires of the actuator to a 12 volt battery.
2.Red wire to the positive terminal and Black wire to negative terminal will make the actuator extend. To make it retract, just reverse the terminal connections.
3.To simplify the last step, you can prepare a reverse polarity relay or switch (not included) for the actuator. When you want the actuator to extend and retract, just press the switch.
4.Your actuator will hold its position when the power is off. It will automatically stop when reaches the end.
5.The actuator has pre-installed inner limit switch, it cannot be adjustable.
How to Maintain: 1.Please use the 12V DC power adapter. 2.The actual load does not exceed the rated load. 3.All the actuators have duty cycle, they are unable to work all the time without stop. 4.The actuator is not completely waterproof.