Seco-Larm SD-9963-KSGQ ENFORCER Post-Mount No-Touch Sensor with Access Box, Adjustable Delay Timer & Override Button; Adjustable Sensor Range Up to 7" (18cm); Stainless-steel Face-plate
The ENFORCER Post-Mount No Touch Sensor with Access Box is a full-featured exit plate that uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand.
Key FeaturesAdjustable sensor range up to 7" (18cm)
Weather resistant for outdoor use
Stainless-steel face-plate
Hinged plate easily removes from box for easy wiring
Adjustable trigger duration 0.8~30 seconds or toggle (ON/OFF)
Form C relay, rated 1A@30VDC
Gooseneck- or wall-mountable
Manual override button
LED-illuminated sensor area for easy identification
Selectable LED colors (turns from red to green or green to red) on sensor activation
Includes heavy-duty steel box
12~24VDC
SpecificationsOperating Voltage: 12~24 VDC
Current Draw: Standby- 16mA@12VDC / 25mA@24VDC, Triggered- 25mA@12VDC / 32mA@24VDC
Relay Type: Form C dry contact, 1A@30VDC
Response Time: 10ms
LEDs - Standby: Red
LEDs - Triggered: Green
Output Time: 0.8~30 s or toggle
Range: 2"~7" (5~18 cm)
IP Rating: IP65 (Front panel only)
Operating Temperature: -4º~131º F (-20º~55º C)
Dimensions: 4" x 5-1/2" x 3" (102 x 134 x 77 mm)
Weight: 1-lb 9-oz (710g)