SHYSKY DC45E-2475S Micro Brushless DC Water Pump 24V 30W, 330GPH 24.6ft, Waterproof, 1/2 inch threaded ports, Low Noise Stable Long-term Work, For Small Water Cooling,Circulation,Gardening,Submersible
[Both inlet and outlet be 1/2" threaded dimension. Stable Work, Low Noise] SHYSKY DC45E-2475S Water pump, 24VDC 30W, Max static lift 24.6ft & Max horizontal flow rate 330G/H. Low voltage safe work. Both inlet and outlet are 1/2" threaded, with external diamater of approximately 20mm, normal threaded port dimension fit for various applications. Small size, high power-efficiency, completely waterproof, supporting long-term stable work with low noise.
[Supporting land use or submersible installation. Cannot be Self-priming] Land use or Submersible installation can be both OK, yet, it cannot be self-priming. Make sure that water can actively & sufficiently flow passing through inlet/outlet. Pump works via centrifugal force of high-speed rotation of impeller inside (to push/throw fluid out). No long-time dry work without in-flow/ insufficient in-flow, or it may damage the pump.
[Supporting wide powering voltage range 10 - 30VDC. Constant power design when at over-voltage.] Pump is powered by matching 24VDC power supply. At real use, the real power output voltage cannot exceed 30VDC. If it is AC/DC power adapter, output capacity is suggested to be 24VDC 2A or over. Supporting Wide powering voltage range, 10 ~ 30V DC. Of course, Lower voltage will result in lower power when voltage is less than rated voltage 24VDC; yet, when it is over-voltage (24 ~ 30V DC), power consumption will be kept almost equivalent, greatly protect reliability and stability of electronics components at work.
[Small size, with anti-vibration rubber bracket] DC45E-2475S pump dimension: 89mm x 68mm x 84mm; Weight: 325 grams; Equiped with one pc of rubber bracket, flexible for installation and reducing noise generated by vibration at work. Suggested to work at normal temperature/ lower temperature water environment (lower than 140℉).
[DRY RUN Protection is integrated in default] NEW FEATURE: DRY-RUN PROTECTION feature is integrated now in default. Pump works at rated voltage: When there exists no/ in-sufficient in-flow (or significant air bubble contained), it is DRY RUN scenario and protection will be triggered: Pump will access stop-run-stop-run---cycle, greatly reducing rotation. When flow comes sufficiently again, pump will re-access normal run. It greatly reduces physical friction between parts and heat generated, yet, not completely eliminate the impact.
1/3 HP Submersible Water Pump 2400GPH, Thermoplastic Utility Pump, Sump Pump, Electric Water Transfer Pump with 10 ft Cord, for Swimming Pool Pond Garden Basement (1/3 HP Black)
KWD 24.500
Stenner Product #FSK100
KWD 26.500
-8%
Liberty Pumps 441 Battery Back-Up Emergency Sump Pump System
KWD 135
24V DC 150W Heavy Duty Water Pump DC80E-24100S-1 150W Lift 10m (32ft) 2113GPH, Brushless Design, Submersible, Low noise, Stable Circulation Cooling System for Yacht Auto Application
KWD 59.500
