Product Description
This is suitable for 4S 14.8V Lithium battery charger ,Made of durability and fire prevention materials, you can easily use it to charge. This battery charger can not only charge devices with batteries, but also power devices without batteries
SUITABLE FOR 4S 14.8 VOLT LITHIUM BATTERY
We strongly recommend that you use a Li-ion-compatible charger.
CHARGER RATING
Input 100-240 volts, 50/60 Hz.Output : 16.8volts, 5 amps ±0.2
TERMINAL CONNECTIONS
DC5.5*2.1mm to use.Insert the DC5.5*2.1mm head into the battery end.When charging, the red light on the charger will light up.When the battery is fully charged, the indicator turns green.
Charger use and maintenance
1.When charging, first connect the battery, then connect it to AC; After filling, cut off the AC, then pull out the battery plug.If you first pull the plug of the battery while charging, especially when the charging current is large (red light), it is very easy to damage the charger.
2. When the LED light turns green, keep charging for 2-3 hours.
3.Don't run out of battery, then charger.Otherwise, the battery cannot be protected or even damaged.
4 long-term surface discharge battery, about 3 months, for deep discharge, it is the so-called re-illumination, which favors the activation of long-term immobile material in the deep part of the battery. Luminous means mount the battery controller low-voltage protection action.
5.Please use the charger in a dry place in time.
6.When not using the charger, do not always connect the power supply.
7.Please confirm your battery, because it is used to charge the lithium battery. Do not use the charger on the Lithiun battery,otherwise the charger will get incredibly hot.
AT WHAT VOLTAGE SHOULD 4S 14.8V LITHIUM BATTERY BE CHARGED?
The full voltage of 4S 14.8V lithium battery is 16.8V, it is recommended to charge the battery under the remaining 50% of power, which can effectively protect the battery.
APPLICABLE TO:The charging rate is 5amps
Best for 10ah, 20ah, 50ah batteries (with BMS system)