AceCrew Brass Electric Solenoid Valve Viton 3/4 inch NPT, 110VAC, 120VAC Normally Closed

AceCrew Industrial grade Electric Solenoid Valve Normally Closed with Viton FKM/FPM seal
Size 3/4 inch NPT thread ,Voltage 110VAC , 120VAC
Brass inlet & outlet NPT thread , easy to install with 2-way 2-position direct lift diaphragm
VAC actuated valve , Normally Closed operation for gas and liquid flow control. Valve will open for flow when energized. Flow rate Cv = 9.3 ; Unidirectional (indication on brass body)
Pipe Size : 3/4" NPT Female (14 TPI) . Orifice Diameter : 3/4" (20 mm).
Seal: Viton FKM/FPM, fluorocarbon Diaphragm : Viton (fiber-reinforced) Current : 0.2 Amp . Wattage : 24 Watt. Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
Solenoid actuated Valve with Viton seal is suitable for Low viscosity fluid, Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, gasoline
Viton FKM seal is better resistant to heat , reducing risks of leaks during operation and ensuring a tight sealing when actuated . Operating Temperature : 15-125 °F (-10~50 °C).To avoid damaging the coil , this valve is not recommended to be in continuous use for more than 8 hours in a single cycle. Media Temperature : 15-250 °F (-10~120 °C)
Weight of solenoid valve : 1 lb 9 oz Solenoid Valves are backed with our 1 Year Warranty

Hello,